Mizuno MP-20 irons – layers of feel

Mizuno MP 20-MB Back


Mizuno omits three new irony in the new MP-20 line which is flawlessly combined

by Sabrina Nakrato

If you have been around golf for long enough, you should know by now that nothing feels like like Mizuno. 'And when it comes to his irony, it is very difficult to dispute that statement.

With the launch of New MP-20 iron line, Emotion was the utmost priority. But wouldn't you think that is the case with all their irony? Well, yes, of course, but they did something different this time. These new ironies have a copper layer that provides the purest feel for the players' club. This is not the first time Mizuno has opted for copper. His famous TN87 iron painted metal and had a feeling that could not be replicated until now.

Feeling is a big part of the story with the irony of the MP-20, but is another feature that needs attention. MP irons usually talk to better players, but the idea has changed with the addition of new MMC and HMB irons. The new technology and the intended ability to mix and match these irony with the classic Muscle Back, opens the MP-20 irony to a whole new group of golfers who now experience how nothing sounds like o Mizuno. & # 39;


Layers of feeling

"Most modern muscle backs and limited edition tour editions" can be traced back to the great Mizuno blade. Although the Mizuno iron which is truly exceptional is everything you cannot see. If you can peel back the chrome plating, you'll get a sandwich of nickel and soft copper before the grain flow forged HD chassis. Under a microscope, you can see a perfect flow of grain within the steel from the hossle to the toe, compacting tight in the kill area. Designers can imitate our lines, but not inside. "


Mp-20 mb

Mizuno MP 20-MB Back

Last Mizuno Muscle Back – Influenced by Mizuno's most revered blade of the past. The 1025E Pure Select Mild Carbon Steel Single Billet Grain Flow Forged HD – then soft copper plating under a protective nickel chrome for legendary feel and response.

Layers of felt: Grain Flow Forged HD in Hiroshima Japan, 1025E Pure Select carbon steel, then plated in soft copper and nickel chrome – great TN87 blades from the original layering Mizuno.

'Tour Ready Profile': Awarded by studying the elements of Mizuno's most played / made Tour Iron model – by contracted and non-contracted tour players. On tour & # 39; Free-Agents & # 39; The use of between provided a new approach.

Vertical: Fixed A judiciously tapered top blade and high sole allow the weight to be fully stretched so that high or low injuries from the face can be forgiven – without retracting traditional muscles.

Sophisticated Topline: The thinnest outline of Mizuno's recent generations – a response to feedback from our tour players. The MP-20 # 3 iron is subtracted 0.05m and the pitching wedge 0.15mm (compared to the MP-18).

Assorted Satin / Mirror Finish: Combining chrome finishing to eliminate areas of high glare in sporting conditions.

Look Mizuno engineer Chris Voshal talks more about the new Mizuno MP-20MB's iron.

* Available Irons: Right-Hand: 3-PW Right-Hand, Left-Hand 5-PW (# a split set with HBM)
* Stock shaft offerings include: Dynamic Gold S300

Retail $ 162.49 per iron and hits starting September 16 in shelves.

Demo and buy Mizuno MP-20 MB iron on GOLFTEC!

MP-20 MMC

Mizuno MP20- MCC Back

The second generation of Mizuno's multi-content concept – with a thin top line and sophisticated scoring irony. Depending on the chassis, the MP-20 muscle back sets flow and ratio – engineered to be more playable through the use of titanium muscle plates and tungsten sole weights. Grain Flow Forged HD from a single billet of 1025E Pure Select Mild Carbon Steel – layered within soft copper plating and protective nickel chrome for legendary feel and responsiveness.

Layers of felt: Grain Flow Forged HD in Hiroshima Japan, 1025E Pure Select carbon steel, then plated in soft copper and nickel chrome – great TN87 blades from the original layering Mizuno.

Sustainability in tour favorites: The titanium muscle muscle back type extends weight for forgiveness from off-center strikes while maintaining center part thickness for feel / response.

Multi-material manufacturing: Grain Flow 1025E lightweight carbon steel chassis and TI muscle pads with 12g tungsten leg weight (4-7 iron) for ease of launch in a compact playing profile.

Better set flow in wedges: A 2 titanium muscle pad is used for short irons, allowing for a narrow 8 iron to pitching wedge.

Dramatically thin topline: As a response to requests from the tour. The MP-20 MMC # 4 iron reduces 0.3mm and the pitching wedge 0.4mm (compared to the MP-18 MMC). Less than 1 mm thicker at address than the MP-20 muscles.

Assorted Satin / Mirror Finish: Combining chrome finishing to eliminate areas of high glare in sporting conditions.

Watch Mizuno engineer Chris Voshal talk more about the new Mizuno MP-20 MMC iron.

* Available Irons: Right Hand: 4-PW Right Hand Only
* Stock Shaft: KBS Tour $ -Topper

Retail starts at $ 174.99 per iron and hits shelves on September 16.

Demo and purchase Mizuno MP-20 MMC iron on GOLFTEC!

MP-20 HMB

Mizuno MP20- HMB Back

Full set of performance hybrids – in a fast 'tour ready' profile. The MP20 HMB, inspired by the proliferation of long iron replacements on tour, extends the concept right through the wedge. Built on the ball speed of Mizuno's Chromoly Face & Neck backed by precise stainless steel body and tungsten weighting. Layered with soft copper plating and protective nickel chrome for legendary feel and responsiveness.

Layers of felt: Grain Flow forged in Hiroshima Japan plated in HD, soft copper and nickel chrome – from the great TN87 blade of the original layering Mizuno.

DNA of muscle: A classic Mizuno players' proportional outline proportions, topline and offset transitions, with the sole width hidden at the address. For consistent ball players, the pace of the ball followed – without sacrificing their shot making options.

Mix with any MP-20 set: Play as a complete set, long iron replacement or MP-20 muscle back or mixed set with MP-20 MMC. Our recommended breakpoints for mixed sets are between 4 and 5 irons or between 7 and 8 irons.

Complex, scaffolding specific construction: Our multi-thickness grain flow lattice chromoly (2–8 iron face and neck) is dialed into the clubface to be continuously heated. Twin 12g tungsten weight (2-7 iron) provides stability and an easy launch. A soft 1025E pure selective lightweight carbon steel makes the small iron (9 / pw) soft and responsive.

Brushed Satin Finish: Low gloss and durable plated finish.

Watch Mizuno engineer Chris Voshal talks more about the new Mizuno MP-20 HMB.

* Available Irons: Right-Hand: 3-PW Right-Hand, Left-Hand 3-4 (Partition Set with # 5-PW MP MP)
* Stock Shaft: Nippon Modus 120 (S) and Nippon Modus 105 (R)

Retail starts at $ 174.99 per iron and hits shelves on September 16.

Demo and Buy Mizuno MP-20 HBM Ironies on GOLFTEC!

Mizuno MP20-SEL Back

MP-20 SEL

Precise, the shotmakers MP-20 muscle's short assorted back to short irony in the middle, and the steady, easy-launching MP-20 HMB are long irons. Mixed sets with lofts adjusted for full distance intervals, based on our most popular right hand.

Watch Mizuno engineer Chris Voshal talk more about the new Mizuno MP-20SL irons.

* Available Ironies: Left Hand: 3-4 (HMB) and 5-PW (MB) only
* Stock Shaft: Dynamic Golf S300

Retail starts at $ 165.62 per iron and hits shelves on September 16.

Demo and buy Mizuno MP-20 SEL iron at GOLFTEC!


Demo and purchase on all Mizuno MP-20 irons at GOLFTEC!


Do you like our content? Subscribe to GOLFTEC Scramble For the latest on instructions, news, tools and more!



Source link

Leave a Reply

Your email address will not be published. Required fields are marked *